60+ Formulations, One Wall of Plates

Forms an emulsion when diluted with water that clings to vertical surfaces to dissolve oil, grease, tar and fuel residue. Safe, pleasant-smelling, economical. Used in food processing, repair shops, marine, construction, automotive, and kitchens. Not suitable for aviation use. Removes dense burnt carbon from aircraft exhaust without harming the metal.

Formulated for parts-washing machines to strip metal surfaces and components of oil, grease, tar, wax, pitch, ink and similar residue. Chlorine/fluorine-free and safe, insulating up to 25,000 volts.

A powerful multi-purpose oil solvent. Removes all stubborn dirt and stains, including tar-hardened oils and greases, even wax and polish layers, from metal, concrete, plastic, vinyl and wood. Non-flammable, phosphate-free. Used on fittings, floors, walls, cooling chambers, repair shops, workshops, abattoirs, print shops and across industry.

A powerful, economical product for removing burnt-on, hardened oil and grime from metal, including aluminium, and any water-resistant surface. Used hot or cold, diluted with water. Non-flammable, 100% fire-resistant.

A powerful, multi-purpose oil and stain remover used on metal, concrete, rubber and plastic surfaces in workshops, repair shops, hospitals, restaurants, hotels and schools.

Especially ideal for cleaning tarpaulins. Dissolves every kind of oil and stain. Dilutable from 1:5 to 1:50 with water. Non-flammable, 100% fire-resistant. Economical and biodegradable.

Cleans oil and grime build-up, and rubber marks, especially on epoxy, concrete, tile and polyurethane floors. A safe product free of acid, caustic or chlorine compounds. Used successfully on factory/workshop floors to remove forklift and tyre marks, and in aircraft hangars for tyre marks.

Removes every kind of dirt, stain, oil, carbon build-up and tyre mark from floors. Clears concrete, tile, polyurethane and epoxy floors and equipment of heavy oil and stains. Water-based, free of harmful solvents, safe and economical. A next-generation additive formula diluted 1:50 to 1:5 with water.

Developed for degreasing and cleaning metal, concrete, plastic and rubber surfaces in workshops, repair shops and factories. Its controlled-foam property avoids blockage in circulating systems.

A powerful, economical product for degreasing metal surfaces and washing parts. Used hot or cold, diluted 1:10 to 1:50 with water. Suitable for degreasing aluminium, cast aluminium, steel, stainless steel, concrete, plastic and any water-resistant surface.

A mild alkaline product that cleans every kind of oil, dirt, wax, grease, cutting fluid, and work grime, plus carbon, paint and polishing residue from metal surfaces while protecting against rust. Safe for the environment and human health. A controlled-foam product usable on all metal, including aluminium, and plastic components.

Used to strip paint and oil from any metal, quickly and safely, by the immersion method. Fully dissolves dense carbon deposits on pistons without harming the metal and without any mechanical process.

Specially formulated to strip hard-to-remove paint, varnish, enamel and fibreglass with ease. Especially ideal for cleaning paint from hanging jigs without sandblasting or burning. Non-flammable, solvent-free.

Strips paint, varnish, shellac, adhesive, polish and vinyl coatings from metal, wood, glass, breeze block and concrete, efficiently and without surface damage. Its thick consistency clings to the surface and penetrates thoroughly. Contains no acid or alkali, so no rinsing or neutralising is needed afterwards.

Removes paint, varnish, shellac, polish, stains, tar and hard coatings from metal, glass, wood, breeze block and concrete. Contains no acid or alkali, needs no rinsing or neutralising afterwards, and causes no scratching or surface damage.

An acid-type product that removes cement scale, sediment and rust. Used to dissolve limescale, algae, rust and stain deposits in cooling and heating systems, steam boilers, construction, and any surface water passes through, as well as to clean oil and dirt from concrete and stone floors.

For the chemical removal of silica and limescale blockages in closed systems and drainage lines. An acidic descaler for dissolving scale layers in combi-boiler heat exchangers and for immersion-cleaning circulation pumps or disassembled parts.

A very powerful cleaner used to remove post-construction mortar, concrete and lime residue; to strip plaster and mortar from ceramic, tile and glass; and to clean cement silos and concrete mixers.

A very powerful product used when WS-FINE FINISH and WS-DECEMENTOR fall short in silica-heavy environments. Also used to prepare aluminium and stainless steel surfaces before painting or coating.

A highly concentrated acid-type product. Removes hard silica scale from boilers and cooling towers, and mortar/concrete residue from cement silos.

Used for general cleaning, degreasing and removing stubborn stains. Reduces wash cycle times in laundries for real savings. Solves even the toughest oil stains and is highly effective on textile machinery and equipment. Manufactured using Elevance Clean 1200 bio-based solvent technology.

Used to safely and easily dissolve the heaviest oils and resin/grease residue. Used neat where water contact is undesirable, or diluted with water. Highly effective and non-damaging on any machinery, engine, equipment or metal surface. Manufactured using Elevance Clean 1200 bio-based solvent technology.

Used to easily dissolve the heaviest oils and to strip stubborn stains and the heaviest tar/resin build-up. A concentrated multi-purpose product, dilutable up to 1:20 with water for economy. Highly effective on any machinery and equipment.

A water-based, multi-purpose product used for general cleaning and to remove oil and stubborn stains. Highly effective on any surface that can be cleaned with water.