60+ Formulations, One Wall of Plates

Safely cleans electric motors and components without disassembly and without fire risk, removing moisture and arc-causing deposits. Insulating up to 30,000 volts.

Protects electrical devices from moisture and corrosion, extending their service life. Prevents short circuits, lubricates motors, and contributes to electrical insulation.

Formulated for degreasing and cleaning electric motors, electrical and mechanical equipment, metal parts, and bearings. Insulating up to 25,000 volts and chlorine/fluorine-free, making it safer than comparable products. Non-corrosive, leaves no residue, evaporates quickly.

Used for cleaning and degreasing both electrical and electronic circuits and equipment. Does not harm plastic, rubber, nylon, or paint. Insulating up to 25,000 volts.

Formulated for the safe, thorough degreasing and cleaning of electric motors, electrical/electronic and mechanical equipment, and metal parts. In electronics manufacturing it cleans and protects DCB substrates, PCBs, ceramic substrates, and copper, nickel, aluminium, and stainless steel components. Water-based, non-flammable, and safe. Contains no acid or alkali.

A halogen-free, organic-acid-type, easy-clean flux formulated for automatic soldering and electronic board assembly. Free of chlorine and bromine compounds, phosphates, and corrosive acids, so it rinses cleanly with water and leaves no residue. Biodegradable and environmentally conscious, with high wetting ability for bright solder joints.

Forms an emulsion when diluted with water that clings to vertical surfaces to dissolve oil, grease, tar and fuel residue. Safe, pleasant-smelling, economical. Used in food processing, repair shops, marine, construction, automotive, and kitchens. Not suitable for aviation use. Removes dense burnt carbon from aircraft exhaust without harming the metal.

Formulated for parts-washing machines to strip metal surfaces and components of oil, grease, tar, wax, pitch, ink and similar residue. Chlorine/fluorine-free and safe, insulating up to 25,000 volts.

A powerful multi-purpose oil solvent. Removes all stubborn dirt and stains, including tar-hardened oils and greases, even wax and polish layers, from metal, concrete, plastic, vinyl and wood. Non-flammable, phosphate-free. Used on fittings, floors, walls, cooling chambers, repair shops, workshops, abattoirs, print shops and across industry.

A powerful, economical product for removing burnt-on, hardened oil and grime from metal, including aluminium, and any water-resistant surface. Used hot or cold, diluted with water. Non-flammable, 100% fire-resistant.

A powerful, multi-purpose oil and stain remover used on metal, concrete, rubber and plastic surfaces in workshops, repair shops, hospitals, restaurants, hotels and schools.

Especially ideal for cleaning tarpaulins. Dissolves every kind of oil and stain. Dilutable from 1:5 to 1:50 with water. Non-flammable, 100% fire-resistant. Economical and biodegradable.

Cleans oil and grime build-up, and rubber marks, especially on epoxy, concrete, tile and polyurethane floors. A safe product free of acid, caustic or chlorine compounds. Used successfully on factory/workshop floors to remove forklift and tyre marks, and in aircraft hangars for tyre marks.

Removes every kind of dirt, stain, oil, carbon build-up and tyre mark from floors. Clears concrete, tile, polyurethane and epoxy floors and equipment of heavy oil and stains. Water-based, free of harmful solvents, safe and economical. A next-generation additive formula diluted 1:50 to 1:5 with water.

Developed for degreasing and cleaning metal, concrete, plastic and rubber surfaces in workshops, repair shops and factories. Its controlled-foam property avoids blockage in circulating systems.

A powerful, economical product for degreasing metal surfaces and washing parts. Used hot or cold, diluted 1:10 to 1:50 with water. Suitable for degreasing aluminium, cast aluminium, steel, stainless steel, concrete, plastic and any water-resistant surface.

A mild alkaline product that cleans every kind of oil, dirt, wax, grease, cutting fluid, and work grime, plus carbon, paint and polishing residue from metal surfaces while protecting against rust. Safe for the environment and human health. A controlled-foam product usable on all metal, including aluminium, and plastic components.

Used to strip paint and oil from any metal, quickly and safely, by the immersion method. Fully dissolves dense carbon deposits on pistons without harming the metal and without any mechanical process.

Specially formulated to strip hard-to-remove paint, varnish, enamel and fibreglass with ease. Especially ideal for cleaning paint from hanging jigs without sandblasting or burning. Non-flammable, solvent-free.

Strips paint, varnish, shellac, adhesive, polish and vinyl coatings from metal, wood, glass, breeze block and concrete, efficiently and without surface damage. Its thick consistency clings to the surface and penetrates thoroughly. Contains no acid or alkali, so no rinsing or neutralising is needed afterwards.

Removes paint, varnish, shellac, polish, stains, tar and hard coatings from metal, glass, wood, breeze block and concrete. Contains no acid or alkali, needs no rinsing or neutralising afterwards, and causes no scratching or surface damage.

An acid-type product that removes cement scale, sediment and rust. Used to dissolve limescale, algae, rust and stain deposits in cooling and heating systems, steam boilers, construction, and any surface water passes through, as well as to clean oil and dirt from concrete and stone floors.

For the chemical removal of silica and limescale blockages in closed systems and drainage lines. An acidic descaler for dissolving scale layers in combi-boiler heat exchangers and for immersion-cleaning circulation pumps or disassembled parts.

A very powerful cleaner used to remove post-construction mortar, concrete and lime residue; to strip plaster and mortar from ceramic, tile and glass; and to clean cement silos and concrete mixers.

A very powerful product used when WS-FINE FINISH and WS-DECEMENTOR fall short in silica-heavy environments. Also used to prepare aluminium and stainless steel surfaces before painting or coating.

A highly concentrated acid-type product. Removes hard silica scale from boilers and cooling towers, and mortar/concrete residue from cement silos.

Used for general cleaning, degreasing and removing stubborn stains. Reduces wash cycle times in laundries for real savings. Solves even the toughest oil stains and is highly effective on textile machinery and equipment. Manufactured using Elevance Clean 1200 bio-based solvent technology.

Used to safely and easily dissolve the heaviest oils and resin/grease residue. Used neat where water contact is undesirable, or diluted with water. Highly effective and non-damaging on any machinery, engine, equipment or metal surface. Manufactured using Elevance Clean 1200 bio-based solvent technology.

Used to easily dissolve the heaviest oils and to strip stubborn stains and the heaviest tar/resin build-up. A concentrated multi-purpose product, dilutable up to 1:20 with water for economy. Highly effective on any machinery and equipment.

A water-based, multi-purpose product used for general cleaning and to remove oil and stubborn stains. Highly effective on any surface that can be cleaned with water.

For metal surfaces about to be painted or coated: its phosphoric acid content removes rust and oil, etching the surface at the microscopic level to form a phosphate layer that improves paint adhesion.

Its phosphoric acid, surfactants and solvents remove heavy rust, oil and dirt from metal surfaces and fully eliminate weld discoloration in metalworking. Saves time and money, and phosphate-coats the surface to prepare it for painting.

Cleans oil, temper colors, weld discoloration, annealing marks and slag from chromium- and nickel-based stainless steels, and protects the metal.

A paste used to remove post-weld discoloration, annealing marks and slag from stainless steel. Far lower odor and fume output compared to similar products.

Used for surface cleaning of stainless steel and non-ferrous metals (aluminium, copper, etc). Clings to vertical and horizontal surfaces alike, removing rust, oil, grease, light pitting and work stains. Reaction time is 15-45 minutes; 1 kg treats approximately 10 m² of surface.

Cleans and brightens darkened, oxidized, contaminated aluminium surfaces in a short time, removing weld discoloration and preparing the surface for paint.

A sulfamic-acid-based, heavily inhibited, easy-spreading descaler that also removes existing rust, corrosion, microbiological growth and algae. Free of the inorganic acids (hydrochloric, nitric, fluoric) that are aggressive to galvanized surfaces.

An acid-free formula that lifts and removes dirt, oil and oxide from aluminium surfaces while polishing them. Foams and clings to vertical surfaces, finishing the job in minutes without scrubbing. Rinses with water. Especially used for cleaning outdoor A/C condenser units.

Removes oil, dust and oxide layers from aluminium surfaces with no rinsing required. Its foaming action clings to vertical surfaces, softens deposits, and drains away naturally with condensation into the drip tray. Especially used for easy cleaning of indoor A/C evaporator units.

A new universal multi-purpose product for cleaning both indoor and outdoor A/C units. Its acid/caustic-free formula lifts dirt, oil and oxide from aluminium surfaces while cleaning filters and ventilation ducts and keeping them clean.

Developed to prevent exterior vertical walls and facades from absorbing water, crumbling or deteriorating. Forms a colorless, transparent water barrier that does not block gas exchange with the outside: walls keep breathing and trapped interior moisture can still escape.

Protects concrete and terrazzo floors against oil, alkalis, acids and dusting. Forms a polymer-based, glossy, transparent, waterproof layer that prevents wear on any surface exposed to rain, snow or sun. Doubles as a curing agent on freshly poured concrete, screed and plaster, and stabilizes dusting, loose surfaces on older floors.

Protects indoor and outdoor concrete floors against wear, dusting and a range of chemicals. Highly UV-resistant, forming a long-lasting layer (at least 10 years) that leaves the floor waterproof and very easy to clean.

Cleans oil and dirt from hands while its glycerin content keeps skin soft. Formulated with vegetable oils. Dilutable up to 1:5 with water without losing consistency.

A heavy-duty hand cleansing cream developed to easily remove industrial oil, carbon, tar, ink and paint from hands. Polyethylene granules clean deep without irritating the skin, while conditioning agents keep hands soft.

Often called an "invisible glove", this barrier cream is made to protect and ease clean-up for hands exposed to heavy oil, grime, soot, paint and petroleum products.

A rich-foaming product developed for washing any dishes by hand. Glycerin-enriched to be gentle on skin. Economical, usable diluted up to 1:7 with water.

Used to clean any washable surface. Fragrant and economical.

Both a powerful cleaner and an odor remover, used as a general-purpose cleaner and as a substitute for petroleum-based solvents. Used in homes, hospitals, hotels, shops, food units, restaurants, offices, factories, public restrooms and waste stations.

Cleans, polishes and protects. Non-corrosive, usable on any bright metal surface: maintains and polishes elevators, railings, frames, extractor hoods and more.

Removes dirt, oil build-up and fingerprints. A safe, water-based formula that cleans instantly and dries fast, leaving a protective, glossy film that resists fingerprints. Usable on any bright metal surface.

Used in food facilities to remove burnt-on oil, tar and soot from ovens and baking trays, and to clean flues. Also used in construction to restore building facades and fire-damaged surfaces.

Its hydrochloric and citric acids together with quaternary ammonium compounds clean toilets, bathrooms, sinks, ceramic and tile surfaces, remove stains, and eliminate the source of bad odors.

A liquid product developed to clear blocked pipes and drains, acting fast on the oil, grease, hair, soap and food-scrap build-up that causes blockages.

Clears blocked sinks, floor drains and toilet lines quickly by dissolving the residue causing the blockage. Acid-based; especially used for blockages caused by paper and sanitary product residue.

A multi-purpose grease-trap and drain maintenance product. Emulsifies accumulated grease and oil into a flowing state, masks and neutralises odor-causing build-up, and leaves a pleasant scent even after the trap is emptied. A safe, naturally-derived formula free of acid, caustic, chlorine compounds and harmful solvents, ideal where bacteria/enzyme products can't be used or act too slowly.

A multi-purpose disinfectant and maintenance cleaner. Emulsifies accumulated waste, grease and oil into a flowing state and prevents blockage. A biodegradable, water-based product ideal where bacteria/enzyme products can't be used or act too slowly, rapidly eliminating bad odors from portable toilets, boats, waste holding tanks and septic pits.

Developed for use in food processing. Contains active chlorine, effective against Gram-positive and Gram-negative bacteria, fungi, mould and yeast.

Cleans microorganisms, dirt and grease that can develop in meat processing, providing hygiene. Contains quaternary ammonium compounds; a powerful product.

An active-chlorine cleaning and hygiene product developed for food facilities with heavy oil and hard water where foaming systems aren't preferred.

An acidic product developed for deep-cleaning and disinfecting organic residue, limescale and water spots, and grease across the food industry, particularly dairy.

An alcohol-based product for the rapid disinfection of alcohol-resistant, food-contact surfaces across food facilities.

Cleans food-contact surfaces of microbiological bacteria in food facilities, catering units, kitchens, warehouses, hospitals, schools and care homes. Controls mould and odor. Requires no rinsing.

Used in meat, fish and all food facilities. Also removes limescale and can safely be mixed with other acidic products. Delivers broad, highly effective hygiene and is environmentally friendly.

Dissolves heavy oil, dirt and protein residue in food facilities. Its foam gives lasting cleaning action: apply, wait 15 minutes, then rinse.

Used across food facilities on any floor not requiring disinfection, to clean heavy oil, dirt, protein and blood.

Provides safe hand cleansing for both staff and customers, especially in food processing. Apply a small amount, rub in, and wash off.

Made to eliminate microorganisms on hands anywhere, anytime. Cleans deeply without leaving residue. Apply a small amount and rub in after washing with WS-SUPEREFF.

Effective against Gram-positive, Gram-negative and spore-forming bacteria (fungi, mould), and an odor remover. Usable on any water-safe surface, no rinsing required. Wide-ranging use across hospitals, schools, food businesses, abattoirs, restaurants, kitchens, factories, hotels, nurseries and care homes.

A cleaning, hygiene and maintenance product for meat, poultry, fish and all food facilities. Cleans heavy dirt and grease, breaks down protein, and kills bacteria all at once. A finely balanced combination of stabilized hydrogen peroxide and acetic acid delivers broad, highly effective hygiene, killing E. coli, Proteus mirabilis, Staphylococcus aureus, Streptococcus faecalis, Pseudomonas aeruginosa and eliminating mould and fungi.

Prepared to protect any metal material from rust and corrosion during shipping or storage. Displaces surface water and moisture, forming a thin but strong protective film unaffected by heat or cold.

Forms a transparent, water- and chemical-resistant coating on metal, wood, stone and concrete. Creates a durable insulating layer that stops rust and protects metal surfaces against corrosion for a very long time. Forms a rugged film that can be painted over or applied to already-painted surfaces.

Instead of removing existing rust by sanding, scrubbing or sandblasting, it controls it at the molecular level and converts it into a strong primer layer.

A water-based, biological product that prevents weld spatter from sticking to the surface during welding. Harmless to the user and environment, free of silicone, solvent and CFCs, and non-flammable.

Prevents any water- and/or solvent-based paint, lime, plaster, or cement mortar splashes from bonding to a surface. Adheres without dripping to wood, plastic, glass, plastered or bare concrete, and painted or unpainted surfaces of any kind.

Penetrates deep in seconds to free seized bolts and fasteners, and rusted-solid tools, locks, hinges and more from long disuse. Removes rust and other build-up. Cleans, prevents rust, lubricates and loosens. An everyday maintenance product for any metal equipment across industry.

A calcium-complex-sulfonate grease with excellent resistance to water, rust and wear. Used successfully in rolling-mill bearings, wet and dry areas of the paper industry, cement plants, mining and the iron-steel sector. Unmatched performance at high temperature, under heavy load, and in wet/corrosive conditions.

Suitable for the food and pharmaceutical industry (H1-rated), also stocked in aerosol form. Formulated with white oils and resistant to water, steam, alkali and cleaning agents, a successful multi-purpose grease even at high temperature.

A fully synthetic high-speed grease formulated with lithium-complex soap and PAO. A superior, plastics-compatible, long-life, high-endurance lubricant for automotive components, delivering excellent performance in high-speed machine-tool operations.

A graphite grease with excellent resistance to water, rust and wear. Excellently lubricates and protects gear wheels, chains, wire ropes and springs in cement and sugar plants, mining and iron-steel. Unmatched performance at high temperature, under heavy load, and in wet/corrosive conditions.